Home > SU16 Accessories >

SU 16 Long Forend (Body only no rails) - M-LOK Compatible
SU 16 Long Forend (Body only no rails) - M-LOK Compatible
 
Alternative Views:


Price $135.00


Stock Status:In Stock

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: R4-BO

M-LOK Compatible Picatinny Rail Sections







Qty:  
Description + Features Installation Instructions
 
Description + Features
Free Floating Aluminum Forend for Kel-Tec SU 16 C/CA (A and B requires front sight removal for install)
Features:
-Main Body and Rails CNC Billet Machined From Aircraft Aluminum Stock
-M-LOK Compatible Slots on 7 sides - NOTE: gas tube interferes with mounting accessories on picatinny rails on top 45 degree flats
-Mil Spec 8625 Black Hard Anodized Mil-Spec
-Blackened Steel Screw Posts for Clamping Bolt
-10-24 Grade 8 Screws
-Extended Clamping Screw Post For Increased Thread Engagement/Strength
-Does Not Interfere With Gun Stripping
-Virtually Full Length Barrel Nut Contact For Solid Lockup
-Easy Installation
-Weighs Approx. 6.25 ounces
-Dimensions: Length 8.85" & O.D. 1.615"
-Made In USA
Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

Accessories
11 Slot Standard Picatinny Rail with hardware
Price $23.50

Add
11 Slot Standard Picatinny Rail with hardware
8 Slot Standard Picatinny Rail with hardware
Price $19.00

Add
8 Slot Standard Picatinny Rail with hardware
19 Slot Standard Picatinny Rail with hardware
Price $31.00

Add
19 Slot Standard Picatinny Rail with hardware
Grommet (Standard Picatinny Rail Nut -Threaded 10-24)
Price $0.95

Add
Grommet (Standard Picatinny Rail Nut -Threaded 10-24)


  0 of 0 people found the following review helpful:
 
5 of 5 Outstanding customer service January 20, 2023
Reviewer: Mitch  
As a longshot, I called the customer service line at 5:30 on a Friday for some help mounting. I Spoke with Jason for about 15 minutes as he walked me through mounting this on a su16 E version. Unmatched customer service and a beautiful looking product. 10/10

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent product! August 9, 2021
Reviewer: Firefly 2021 from California  
I recently purchased the aluminum forend for my SU-16 and I absolutely love this thing.  It completely changed the feel of the gun when aiming and firing.  It feels far more solid now, like it's one unit.

I also ordered one M-LOK rail for the bottom front of the forend and attached a Magpul AFG-2 angled fore grip to it.  In addition, I used some Magpul M-Lok rail cover (type 1) halfway up on both sides for the length of the angled fore grip.

This produced an excellent hold point and the rail covers protect against the heat generated from the barrel.  I fired 40 rounds in quick succession and while the rest of the forend and barrel were way too hot to touch, the grip area was barely even warm.

I cannot recommend this product too highly.  It changed what was a decent rifle into an excellent rifle.  It's now my favorite gun.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Good, but could be great May 5, 2020
Reviewer: Phil from Holtsville, NY United States  
So the installation was easy enough and the rails went on fine. Everyone was great until the 4th mag change. The design of the fore-end is pretty neat, but it doesn't address the heat build up from the SU-16. Quite frankly it is quite worse than the factory fore-end. However, it won't melt in your hands because it's metal. However, because it's metal, it'll heat up a lot faster. So people who think they're gonna have some mag-pul grip in the front, forget about it. If the fore-end was fatter at the bottom, and maybe had some material inside to contend with the heat, it would make this sleek ergonomic fore-end amazing. If you want to see this in action, please see my IG @ aggrophil

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Solid Grip May 8, 2015
Reviewer: Anonymous Person from OLYMPIA, WA United States  
I was going to put this on a su 16.
But i had a plr 16 in house so i put it on the PLR 16 then a 5" fake can inside the longer grip.
Added a green laser illuminator and angled for grip.
plenty of room. no heat problems. The 11 oz fake can helps sound, flash, felt recoil and muzzle rise.
It all looks and works well together.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 fantastic Machining September 4, 2014
Reviewer: hunter forrest from agoura hills, CA United States  
completely essential for the su, and the price is 100% worth it, I run mine with magpul rails because, although I sometimes just want to leave it bare it looks so neat, it does get real HOT after some shooting

Was this review helpful to you?

View All Customer Reviews